Hurricane TRX Stump Cutters Track-Mounted


173 HP John Deere T4F Turbo Charged Diesel

Track-Mounted Stump Cutter/Grinder

The Hurricane TRX Stump Cutter is a versatile high volume stump cutter. This innovative unique machine gives you an unmatched combination of cutting power, maneuverability, and productivity. Many unique proprietary design features make it the perfect choice for high volume residential and light clearing applications.

The proven Caterpillar track undercarriage used on the Hurricane TRX provides maximum traction in all situations. This track drive system has two gears, low gear for maximum climbing power, and high gear for rapid ground travel when needed. The Hurricane TRX will get you to the stumps!

The rubber tracks used on the Hurricane TRX Stump Grinder are at home on both clearing sites and turf. The long and wide footprint of the Caterpillar tracks minimizes ground pressure. This allows the machine to float across soft ground, getting you to stumps that would otherwise be inaccessible. Another advantage of the rubber track system is the minimal damage done to asphalt or concrete. The rubber tracks truly do minimize damage to any surface!

The proportional wireless remote control, included as standard on every Hurricane TRX, gives the operator precise control from up to 1,500 feet. This powerful remote allows the operator to control the machine from auxiliary equipment. This remote features feather touch controls which allow the operator to control the speed of every function right from his fingertips. This remote minimizes operator fatigue, maximizing operator efficiency over a long day. The J.P. Carlton Hurricane TRX delivers high production capacity in an extremely versatile package.

  • Continuous 360° Rotation allows cutting of a massive 19-ft width.
  • Patented Boom Design allows the Hurricane TRX to cut an amazing 72-inch high and over 2 feet deep.
  • High Horsepower John Deere Diesels coupled with J.P. Carlton’s patented drive system allows the operator to take a 6-inch bite in every pass.
  • Hydraulic Scrape Blade lets operators move chip piles or debris quickly.
  • Caterpillar Rubber Track Undercarriage provides optimal traction in all situations.


Engine options
140 to 250 Horsepower Turbo Charged
John Deere Diesel
Cutting depth below ground 25″
Cutting height above ground 72″
Cutter head swing 20′ diameter continuous rotation
Number of teeth on cutter wheel 132, razor wheel is only wheel offered
Cutter wheel diameter w/teeth 36 1/2″
Cutter wheel thickness 1 1/2″ Blanchard ground
Jack shaft bearings 3 3/16″ Tapered Roller
Cutter wheel bearings 3 3/16″ Tapered Roller
Head lift bearings 4 7/16″ Tapered Roller
Fuel tank capacity 45 gallons
Hydraulic tank capacity 45 gallons
Track width 16″
Track length 97″
Ground pressure 4 psi
Machine width 78″
Machine height 86″
Overall length 185″
Total weight 12500 lbs.
Paint Dupont Imron with Epoxy Primer


Subscribe to our Channel

Subscribe to J.P. Carlton Professional Tree Equipment’s YouTube Channel to hear about new videos as soon as they’re posted!

Subscribe on YouTube


Call Toll Free