2012 2512 12 Inch Chipper

2012/2512 Series (12 in.)

140 HP John Deere

Disk Style Wood Chippers

12-Inch Chipper Options

J.P. Carlton offers a variety of 12-inch chipper models to tackle almost any project.

The J.P. Carlton 2012 Wood Chipper features 20-inch long feed rollers, while the 2512 features 25-inch long feed rollers. The longer rollers on the 2512 give it a wider throat at the rollers, making it feed more aggressively. The 2512 is available as an HD (heavy-duty) model for the most difficult chipping conditions. The HD model comes with a 9000 lb. Dexter Torflex axle and an extreme duty 3- by 6-inch steel frame. No matter what the project, no matter what the conditions, J.P. Carlton has the right wood chipper for you.

The J.P. Carlton Model 2012 wood chipper incorporates numerous standard features found only as options on competitive machines. Standard features like live hydraulics, dual lift cylinders, reversing auto feed, Kevlar belts and Dupont Imron paint, put the 2012 in a class by itself. High horsepower diesel engines, a 20-by 12-inch throat opening and a 64-inch wide infeed give the J.P. Carlton 2012 massive capacity. Plus J.P. Carlton wood chippers are built to the highest standards providing contractors the operation and reliability they need.

Innovative Features

Magnify Photos Features, Benefits & Innovation: Click for a Close Up Look!

SpecificationsFeaturesManuals & Literature
Model Key
2012
2512
2512 HD
General
Weight
6200 Pounds
6400 Pounds
7000 Pounds
Length 186 inches
Height 100 inches
Tires
215/75R17.5 Ld Rng H 4805 # @125 PSI
235/75R17.5 Ld Rng H 6005 # @125 PSI
Axle
Dexter Torflex 8,000 Pound Cap
Dexter Torflex 9,000 Pound Cap
Brakes Electric with Breakaway Switch
Hitch Five Inch Height Adjustable Pintle
Fuel Capacity 40 Gallons
Battery 29HVD 650 CCA
Jack Stand 7000 # Cap Screw Type Swing Up
Engine *
Manufacturer John Deere
Number of Cylinders Four
Bore 4.19 Inches (106 mm)
Stroke 5.0 Inches (127 mm)
Displacement 276 Cubic Inches (4.5L)
Maximum RPM 2400 RPM
Horsepower 140HP
Torque 367 Ft Lbs (498 NM)
Cooling Medium Liquid Water/Antifreeze Mixture
Air Cleaner Two Stage Dry Type
Oil Filter Full Flow Spin On
Oil Capacity 15 Quarts
Oil Type John Deere
Electrical 12 Volt
Gauges Oil Pres, Water Temp, Amp, Digital Tach
Clutch Twin Disk 11 1/2 ” Over Center
Bearings
Disk Bearings 2 7/16 inches Tapered Roller
Feed Roller Bearings 2 inches Tapered Roller
Disk Shaft 3 1/2 inches
Feed Roller Shaft 2 inches
Chipper Disk
Wheel Diameter 40 inches
Wheel Thickness 2 inches
Wheel Thickness 2 inches
Disk Balance Precision High Speed Balanced
Wheel Speed 1180 RPM
Number of Knives 4
Knife Dimensions 7 1/4 ” x 4 1/2 ” x 1/2 “
Anvil 4 1/2 ” x 12 1/2 ” x 1/2 ” AR400
Chip Throwers Two 3/8″ x 4″ x 4″ x 12″ long

Cutting Dimensions

Throat Opening
12 3/4 ” x 20″
12 3/4 ” x 25″
12 3/4 ” x 25″
Hydraulic System
Hyd Pump Displacement .87 in cu/rev (14.4cm cu/rev)
Hyd Pump Drive System Direct Drive off Engine Mount
Flow Variable Pressure Compensated
System Relief 2500 PSI
Oil Tank Capacity 13 Gallons
Oil Type AW32
Valve Series Type
Hose 16,000 PSI Burst – Exceeds SAE 100R2
Oil Filter 10 Micron Return with Suction Strainer
Drive System
Engine Sheave 6/5V7.1
Jackshaft Sheave 6/5V15
Drive Belt 6/5V1000 Kevlar Construction
Cutter Head Shaft 4 1/4 “
Feed System
Feed Motors 32 Cubic Inch Displacement
Flow Pressure Compensated Adjustable
Hydraulic Drive Live – Driven off engine
Autofeed Reversing, Digital, Fully Adjustable
Feed Rate Adjustable
Feed Rollers
Two 10 1/2 ” x 20″
Two 10 1/2 ” x 25″
Two 10 1/2 ” x 25″
Springs Two 19″ Tight Wound Powder Coated
Slide Bearings Four 16″ x 1″ x 1″ Ryertex
Lift Cylinders Two 2 x 12 with 1″ attachments
Discharge Crank Adjustable Swivel and Height
Frame
Main Trailer Tongue 4″ x 6″ with 3/8 ” wall
Main Trailer Frame
2″ x 6″ with 1/4 ” wall
3″ x 6″ with 1/4 ” wall
Telescoping Tongue 3″ x 5″ with3/8″ wall by 72″ long
Engine Channel Mnts 4″ Channel with 5/16 ” web
Infeed Chute 3/16″ with 2″ x 2″ x 1/4″ tube frame
Folding Infeed Tray ³⁄16″ with 4″ x 1 1/2 ” x 3/16 ” bracing
Folding Tray Lock 3/4″ Spring Loaded Pin
Discharge Chute 10 gauge
Discharge Lock 3/4″ Spring Loaded Pin
Fuel Tank 10 gauge with baffles rubber mtd
Hydraulic Tank 10 gauge with baffles rubber mtd
Battery Box 10 gauge checker plate – lockable
Fenders 3/16″ checker plate
Feeder Bar 1 1/2 ” OD x 1/8 ” wall – removable
Radiator Guards 2″ x 4″ with 3/16 ” wall
Light Brackets 3/16″ with hidden wiring
Axle Mounts 1/2″ Plate
Hitch Plate 3/4″ Plate adjustable 5″ Up/Down
DUE TO CONTINUOUS DESIGN IMPROVEMENTS
CONSULT FACTORY PRIOR TO ORDERING 1-800-243-9335.
  • LED Taillights mounted high on the infeed out of harms way. All J.P. Carlton chippers come with heavy duty taillight covers as standard equipment . All the wiring runs inside the frame to give the machine a neater appearance and keep wires clear of damage.
  • Heavy Duty Planetary Winch with cable and choker is an option on all J.P. Carlton Chippers. This planetary winch has two speeds and the strongest pulling power available on a chipper.
  • Hand Crank Swivel Discharge Chute allows the operator to easily fill the truck corner to corner, or easily direct the chips to a precise place on the lot.
  • Standard Hydraulic Cooler keeps the system running at ideal temperature. This increases both performance and component life.
  • Hand Crank Height Adjustable Discharge Chute allows the operator to quickly adjust the discharge perfectly for any truck.
  • Heavy-Duty 1 ½” Feeder Bar
  • 20″x 12″ Throat Opening, largest in its class, easily handles the most difficult materials.
  • 64″ Wide Infeed Chute takes the big tops, requires less trimming by the crew! A 48″ Wide Chute is available when a more compact chipper is desired.
  • Live Hydraulics run directly off the engine allowing the operator to engage all hydraulic functions without the disk being engaged.
  • Engine Options include Kubota, Caterpillar, and John Deere from 80 horsepower to 140 horsepower. These arborist engine packages are specifically designed for use on a chipper and include heavy-duty radiator screens, live hydraulic pump hook ups, locking side panels, and easy access to filters and fluids.
  • Heavy-Duty Infeed Table and Folding Tray.
  • 30″ Telescoping Tongue allows the operator to adjust the length to easily fit under the largest chip bodies.
  • Locking Fuel and Hydraulic Tanks sit down in the frame for maximum capacity and a clean design.

Product Manuals

Model Version Date PDF Description
2012/2512 Series (12-inch) Wood Chipper July 2010 071510 – pdf – 7.6 MB

Previous Manuals

Model Version Date PDF Description
2012/2512 Series (12-inch) Wood Chipper January 2010 010410 – pdf – 7.0 MB

Product Literature

Model PDF Description
2012/2512 Series (12-inch) Wood Chipper pdf – 2.0 MB

Featured Video

 

View All Videos View All Videos

Subscribe to our Channel

Subscribe to J.P. Carlton Professional Tree Equipment’s YouTube Channel to hear about new videos as soon as they’re posted!

Subscribe on YouTube

Call Toll Free

800-243-9335