1712 Series Wood Chipper

1712 Series (12 in.)

84 HP Kubota Turbo Charged Diesel

Disk Style Wood Chipper

12-Inch Chipper Options

J.P. Carlton offers a variety of 12-inch chipper models to tackle almost any project.

The J.P. Carlton Model 1712 Wood Chipper provides an ideal balance of capacity, economy, and portability. At just 5400 pounds the 1712 is easily towable by smaller chip trucks. The lightweight and compact size of the 1712 makes it highly maneuverable in tight places.

J.P. Carlton Model 1712 incorporates many design features to make it a highly productive 12-inch capacity chipper. The 48-inch by 28-inch infeed opening allows the 1712 to swallow tops with little or no trimming. The 10½-inch diameter feed rollers accept the wood with minimal fuss or wrapping. The industry’s largest 32-cubic-inch displacement hydraulic feed motors provide the power to pull and collapse limbs and tops.

Innovative Features

Magnify Photos Features, Benefits & Innovation: Click for a Close Up Look!

SpecificationsFeaturesManuals & Literature
General
Weight 5360 Pounds
Length 186 inches
Height 93 inches
Tires 215/75R17.5 Ld Rng H 4805 Pd @ 125PSI
Axle Dexter Torflex 7,000 Pound Cap
Brakes Electric with Breakaway Switch
Hitch Five Inch Height Adjustable Pintle
Fuel Capacity 24 Gallons
Battery 29HVD 650 CCA
Jack Stand 7000 # Cap Screw Type Swing Up
Engine
Manufacturer Kubota Turbo Charged Diesel V3600T
Number of Cylinders Four
Bore 3.86 Inches (98 mm)
Stroke 4.33 Inches (110 mm)
Displacement 220 Cubic Inches (3.6L)
Maximum RPM 2800 RPM
Horsepower 84 HP
Torque 205 Ft Lbs
Cooling Medium Liquid Water/Antifreeze Mixture
Air Cleaner Two Stage Dry Type
Oil Filter Full Flow Spin On
Oil Capacity 14 Quarts
Oil Type SAE 10W40 CD Grade or Higher
Electrical 12 Volt
Gauges Oil Pres, Water Temp, Amp, Digital Tach
Clutch Stein
Bearings
Disk Bearings 2 7/16 inches Tapered Roller
Feed Roller Bearings 2 inches Ball Bearing
Disk Shaft 3 1/2 inches
Feed Roller Shaft 2 inches
Chipper Disk
Wheel Diameter 37 1/2 inches
Wheel Thickness 1.5 inches
Disk Balance Precision High Speed Balanced
Wheel Speed 1180 RPM
Number of Knives 4
Knife Dimensions 7 1/4 x 4 x 1/2″ and 6 3/32 x 4 x 1/2
Anvil 4 1/2″ x 11″ x 1/2″ AR400
Chip Throwers Two 3/8″ x 4″ x 4″ x 11″ long
Cutting Dimensions
Throat Opening 12″ x 17″
Infeed Hopper Opening 29″ x 48″
Hydraulic System
Hyd Pump Displacement .8 Cu in
Hyd Pump Drive System Direct Drive off Engine Mount
Flow 8.8 GPM Total
System Relief 2500 PSI
Oil Tank Capacity 9 Gallons
Oil Type AW32
Valve Energy
Hose 16,000 PSI Burst – Exceeds SAE 100R2
Oil Filter 10 Micron Absolute in Tank Return withSuction Screen
Drive System
Engine Sheave 4/5V8.5
Jackshaft Sheave 4/5V14.0
Drive Belt 4/5V950 with Aramid Fiber Cord
Cutter Head Shaft 3 1/2 inches
Feed System
Feed Motors Two 32 Cubic Inch Displacement
Flow 4.4 GPM to Each Motor
Hydraulic Drive Live – Driven off engine
Autofeed Digital, Fully Adjustable
Feed Rate 100 Feet Per Minute
Feed Rollers Two 10 1/2″ x 17″
Springs 19″ Tight Wound Powder Coated
Slide Bearings Four 1″ Hardened
Lift Cylinder 2 x 12 with 1″ attachments
Discharge Adjustable Swivel
Frame
Main Trailer Tongue 3″x 4″ with 1/4″ wall
Main Trailer Frame 2″x 4″ with 3/16″ wall
Telescoping Tongue N/A
Engine Channel Mnts 4″ Channel with 5/16″ web
Infeed Chute 10ga with 2″ x 2″ x 1/8″ tube frame
Folding Infeed Tray 10ga with 4″ x 1 1/2″ x 3/16″ bracing
Folding Tray Lock 3/4″ Spring Loaded Pin
Discharge Chute 10 gauge
Discharge Lock 3/4″ Spring Loaded Pin
Fuel Tank Molded Plastic
Hydraulic Tank 1/4″ Steel Fabricated Tank
Battery Box Marine Grade
Fenders 3/16″ checker plate
Feeder Bar 1 1/2″ OD x 1/8″ wall – removable
Light Brackets 3/16″ with hidden wiring
Hitch Plate 3/4″ Plate adjustable 5″ Up/Down
DUE TO CONTINUOUS DESIGN IMPROVEMENTS
CONSULT FACTORY PRIOR TO ORDERING 1-800-243-9335.
  • Tail Lights are protected by the infeed tray during chipping.
  • Swivel Discharge allows the operator to fill the truck corner to corner, or easily direct the chips to a precise place on the lot.
  • Heavy Duty 1 ½” Feeder Bar
  • 12″ x 17″ Throat Opening, easily handles the most difficult materials.
  • 48″ Wide Feed Chute takes the big tops, requires less trimming by the crew!
  • Live Hydraulics run directly off the engine allowing the operator to engage all hydraulic functions without the disk being engaged.
  • 84 HP Arborist Package Kubota Diesel, specifically designed for use on a chipper and includes: radiator debris screen, live hydraulic pump hook up, slanted top, locking side panels, easy access air cleaner mounted to the rear of the engine to keep it as far away from the dust as possible.
  • Heavy-Duty Infeed Table and Folding Tray.

Product Manuals

Model Version Date PDF Description
1712 Series (12-inch) Wood Chipper May 2010 051910 – pdf – 5.7 MB

Previous Manuals

Model Version Date PDF Description
1712 Series (12-inch) Wood Chipper September 2009 091609 – pdf – 5.6 MB

Product Literature

Model PDF Description
1712 Series (12-inch) Wood Chipper pdf – 2.3 MB

Featured Video

 

View All Videos View All Videos

Subscribe to our Channel

Subscribe to J.P. Carlton Professional Tree Equipment’s YouTube Channel to hear about new videos as soon as they’re posted!

Subscribe on YouTube