Carlton Professional Tree Equipment

Roll over targets to view product features
Deutz Diesel Engine 60-horsepower model.
Patented Turntable Design keeps engine low and level during operation, allows for a giant 70-inch swing travel.
Extendable and Retractable Tracks hydraulically contract from 48- to 35- inches allowing access to tight working conditions.
Rubber Tracks Deliver maximum climbing power and minimal lawn disruption.

The SP7015 TRX is truly a go anywhere do everything machine.

The SP7015 TRX 60-horsepower track machine features a wireless remote control, 4 speed ground drive system, traction control, and telescoping tracks.

The unit’s track system hydraulically retracts from 48-inches to 35-inches so the operator can maneuver easily through tight situations like a back yard gate. The SP7015 TRX packs big cutting power in a compact unit and produces only 3.2 psi. ground pressure.

The four speed track system allows the operator to choose between high speed travel modes and high torque cutting modes at the flip of a switch. The TRX Series from Carlton are redefining versatility.

Clean Design Undercarriage allows for ample chip capacity while providing ground clearance needed when on rough terrain.

Four Speed Ground Drive System provides variable travel speeds up to 3.5 MPH!

Narrow 35-inch stance allows the SP7015 TRX to get into tight spaces.

Wireless Remote Control keeps the operator out of the dust, debris and noise.

Specifications

Engine options	60 HP Deutz Turbo Charged
Cutter depth below ground	15"
Cutter height above ground	43"
Cutter head swing	70" arc
Number of teeth on cutter wheel	32
Chip containment volume	38 cu. Ft.
Cutter wheel diameter with teeth	26.5"
Cutter wheel thickness	1" Blanchard ground
Jack shaft bearings	1 11/16" Flange Mounted Tapered Roller
Cutter wheel bearings	2" Tapered Roller
Fuel tank capacity	9.6 gallons
Hydraulic capacity	9 gallons
Track dimension	9 1/2" X 75" Long
Ground pressure	3.2 psi
Machine width	35" Track Width Retracted 48" Track Width Extended
Machine height	57"
Machine length	10' 6"
Total weight	4300 lbs.
Paint	Dupont Imron with Epoxy Primer